Thiết bị kiểm tra áp suất H2 hàng đầu của chúng tôi được sử dụng trong nghiên cứu & phát triển. Ngoài ra, nó còn được sử dụng để đo điểm chuẩn liên tục của quy trình sản xuất nhằm xác nhận chất lượng thành phần H2.
Our flagship H2 test bench is utilised in research & development. In addition, it is used for constant benchmarking of the manufacturing process to validate H2 component quality. The rig is qualified to test H2 components such as 0n-tank valves, sensors, hoses, fuel cell components and more.
P+P test stands are used in research & development and to constantly benchmark the manufacturing process and H2 component quality. To guarantee the safety of media-carrying components during their entire service life, components must undergo endurance tests under extreme load and temperature changes. P+P offers and uses flexible solutions while simulating diverse conditions and environments. Our test systems allow for leak tests with a range of more than 1050 bars, depending on the specification.
The test stand can be expanded with several expansion stages. Depending on the option selected, pressure cycle tests up to 2,000 bar and 10 Hz can be generated in addition to the gas test. Pressure ramps of up to 3,000 bar can be generated with the test circuit for hydrostatic and burst pressure tests.
The system consists of two modules. The tests can be carried out in a climate chamber, in which the components can be exposed to media and outside temperatures from -40 °F (-40 °C) to +320 °F (+160 °C). The individual printing units are precisely tailored to the properties and components of the customer in order to generate ideal test conditions. A common setup in the industry and for this specific test stand is one intensifier for 1000 psi (70 bar), two for up to 4000 psi (275 bar) and one for up to 6000 psi (414 bar). A typical test medium is water, glycol, aerospace oil, gas, and other oils.
+For pressure tests according to EG79 / EU406 – Section 4.2 and ECE R134
+Pressure booster for additional supply
+Displacement volume max. 15cm³
+Frequency up to 10Hz
+Pressure Load Changes as sine & trapezoidal curve (depending on the expansion volume)
+Impulse intensifier for small volumes up to 2,000bar
+Safety test chamber with automatic door
+Media treatment with dirt and a clean tank
+Refill for pressure change test complete electrotechnical equipment for pressure tests
+Controller for maximum precision
+Hydraulic power pack with Moog RKP and 55kW
+Preparation for connection for second test chamber
+Test medium hydraulic oil
+Displacement volume max. 600 cm.
+Frequency up to 10Hz
+Pressure curve programable as sine & square (trapezoidal) curve
+Including the extension of the hydraulic unit to 75 kW
+1050 bar gas/helium /nitrogen/hydrogen
+Hydrogen (H2) components
+Pressure tests according to EG79 /
+EU406 and R134
+Test media: Oil (HLP 46)
+A total of 3 test tracks for pressure cyle tests
+Max. 2.000 bar for 15 cm³
+Max. 1.500 bar for 500 cm³
+Max. 50 bar for 1.000 cm³
+Pressure intensifier for bursting up to 3.200 bar (200 cm³)
+Reloading of the pressure intensifieres
+Frequency up to 10 Hz (depents on test setup)
+Safety chamber with automatic door
+Climate chamber for regulated ambient temperature from -40 °C up to +160 °C
+Media filtration unit with clean and dirt tank-system
+High precision controller integrated
>>> CÓ THỂ BẠN QUAN TÂM >>>
Tủ thử nghiệm lão hóa do thời tiết
Tủ thử nghiệm nhiệt độ, áp suất theo độ cao
Tủ thử nghiệm chống xâm nhập IPx
Thiết bị thử nghiệm rơi và va đập
Máy Kiểm Tra Độ Bền Bộ Ly Hợp TEST ONE
Giá bán: 0.00
MÁY KIỂM TRA TÁC ĐỘNG TỐC ĐỘ CAO
Giá bán: 0.00
MÁY KIỂM TRA ĐỘ BỀN TAY NẮM CỬA Ô TÔ
Giá bán: 0.00
MÁY KIỂM TRA ĐỘ BỀN CỐP SAU
Giá bán: 0.00